Solid Mechanics Laboratory

 

Universal Testing Machine with Split Furnace:

Universal Testing Machine with open hydraulic grip comes with the latest technology, versatile controls, proven software and complete gamut of accessories to provide highly accurate and repeatable static testing in the material testing world. The machine is ideally suited for tensile, compression, bend, re bend, proof and ultimate strength tests on specimens such as metals, non-metals and compound materials.

Specifications:

Make: Bluestar Engineering & Electronics

Model No: BSUT-100-JD    Load Frame: 1000 KN

Measuring Capacity: 0-1000 KN   Least count-20

Accessories: Clip on Extensometer with gauge length of 50mm and 25mm, elongation 0-2mm,  resolution 0.001mm, diameter/thickness measured of 1-20mm

 

 

 

 

 

 

 

 

 

Torsion Testing Machine:
Torsion Testing Machine is designed for conducting torsion and twist on various metals wires, tubes, sheet materials. Torque measurement is by pendulum dynamometer system.

Torque ranges can be adjusted by auto torque selector. Torque can be applied to specimen by geared motor through gear box.

Autographic recorder gives the relation between torque and angle of twist.

Specifications:

Make: Bluestar Engineering & Electronics

Model: TT-6

Maximum Torque Capacity: 60Nm

Torque Ranges:30-60 Nm

Resolution/Least Count: 0.1/0.05

 

 

Computerised Touch Screen Brinell Hardness Tester:

A Brinell hardness tester measures the permanent width of indentation produced by a ball indenter applied to a test specimen at a given load, for a given length of time. Typically, the indentation is made with the Brinell hardness testing machine and then measure for indentation diameter. In the second step with a specially designed Brinell Image Analysing System which measures the diameter of indentation automatically, with a resolution of 0.01 mm and displays Brinell value with diameter measurement.

Technical Specifications:

Make: Bluestar Engineering & Electronics

Total Load: 500-3000 kgf

Magnification of objects: 2X

Max. Test Height: 380 mm

Least Count:0.01 mm

 

 

 

Computerised Touchscreen Vickers Hardness Tester

Computerised Hardness tester is a simple and accurate means to produce and automatically measure the diamond indentation to give Vickers Hardness number. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range from soft to hard and their accurate results are widely acclaimed.
 

Specifications:

Make: Bluestar Engineering & Electronics

Load Range:1,5,10,20,30,50 kgf.

Max. Test height: 200mm

Least Count:0.001

Diagonal Measuring Range: 0.05-0.4

 

 

 

 

Digital Rockwell Cum Superficial Hardness Tester

Rockwell and Rockwell superficial tests consists of forcing an indenter (diamond or ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring the depth of indentation (after removal of the additional test force) for the measurement of the hardness.

 

Specification:

Make: Bluestar Engineering & Electronics

Model: RANSET-3

Total Load:15,30,45,60,100,150 kgf

Major load:12,27,42,50,90,140

Minor Load:3,10

Max. Test height:230mm

 

 

 

Impact Testing Machine(Charpy & Izod):

The pendulum Impact tester is designed for conducting Charpy and Izod test. The pendulum is mounted on the antifriction bearings. It has two starting positions, the upper one for the Charpy   test and the lower one for the Izod Test. On the release the pendulum swings down to break the specimen and the energy absorbed in doing so is measured as the difference between the height drop before rupture and the height rise after rupture of the test specimen. The reading is taken from the pointer position on the dial scale.

 

Specification:

Make: Bluestar Engineering & Electronics

Model: IT 30 (ASTM)

Max. Capacity: 170/300J

Min. Scale Gradation: 2J